Support Products
Mounting options for walls and ceilings, alignment shims,
high impedance transformers and loudspeaker protection units.
All options allow for a successful and flexible installation.
Support Products
Protection Units
APU-RSi
Rack-Mountable Multi-Channel Protection Units.
Compact Protection
Passive rack-mounted protection unit for Amina Invisible Loudspeakers. For use in installations with higher numbers of low-impedance speakers with a centralised AV rack. Direct-to-PCB screw terminal-blocks allow for fast and easy permanent installation. Either 8 or 16 channel options available.
Highly Flexible
With each channel containing a selectable HPF and self-resetting thermal fuse circuit, you can be sure that each speaker will perform safely even when pushed to its limits. Please note that each channel should be set to the appropriate protection group as per below guide.
‘C’ version APU’s include improved low frequency performance for use with Amina Edge Series Invisible Loudspeakers.
Please confirm model at point of purchase – for example APU-RS16iC for Edge7.
‘Non C’ version APU’s have a slightly higher HPF setting, appropriate for loudspeakers with limited LF extension such as iQ.
Please confirm model at point of purchase – for example APU-RS16i for Mobius5.
| Specifications | APU-RS16i (C-version available) | APU-RS8i (C-version available) |
| Default protection setting | Group1 - 15W | Group1 - 15W |
| Dimensions | 1U high, front panel 482mm x 44.4mm (19” x 1 3/4”), case depth 213mm (8 3/8”) | 1U high, front panel 482mm x 44.4mm (19” x 1 3/4”), case depth 213mm (8 3/8”) |
| Electrical connection | Direct-to-PCB screw terminal blocks | Direct-to-PCB screw terminal blocks |
| Product weight | 3.14Kg (6lbs 14oz) | |
| Speaker families supported | Mobius, Edge(C), iQ See compatibility table | Mobius, Edge(C), iQ See compatibility table |
| Protection Group | Compatable Loud speakers |
| 1 | iQ1, iQ2 |
| 3 | MobiusDual, iQ3, AIW350iN-S200 |
| 5 | Mobius5, Edge5 (C-version) |
| 7 | Mobius7 (C-version), Edge7 (C-version) |
| Datasheets | Images | Installation Guides |
| APU-RS8i / APURS-8iC Datasheet | APURS8i(C) Open | APU-RS Install Guide |
| APU-RS16i / APURS-16iC Datasheet | APURS16i(C) Open | |
| APURS Closed |
APUi
Single-Channel Protection Unit.
In-line
Single channel in-line protection unit for use with all low impedance Amina loudspeakers. Connected to the output terminal of the amplifier before the loudspeaker cable to allow maximum loudspeaker performance for a lifetime.
Can be easily dressed back with any cable management system.
Compatibility
Each unit contains an individual HPF and self-resetting thermal fuse specific to one particular loudspeaker model. Please ensure that the appropriate APUi is connected to each loudspeaker. See compatibility table below.
‘C’ version APU’s include improved low frequency performance for use with Amina Edge Series Invisible Loudspeakers.
Please confirm model at point of purchase for example APUi70C for Edge7
‘Non C’ version APU’s have a slightly higher HPF setting, appropriate for loudspeakers with limited LF extension such as iQ.
Please confirm model at point of purchase – for example APUi50 for Mobius5.
| Dimensions (including cable) | 760 x 20mm |
| Dimensions (excluding cable) | 150 x 20mm |
| Weight | 108g (0.24lbs) |
| Cable termination | Un-terminated |
| Cable length (each side of APUi) | 300mm |
| Cable type | Double-insulated 2.5mm stranded 2-core |
| 19" rack-mount alternatives | APU-RS16i, APU-RS8i |
| Warranty | 2-year manufacturer limited warranty. |
| APUi10 | iQ1, iQ2 |
| APUi30 | iQ3, MobiusDual, AIW350iN-S200 |
| APUi50 | Mobius5 |
| APUi50C | Edge5 |
| APUi70C | Mobius7, Edge7 |
| Datasheet | Images | Installation Guide |
| APUi Datasheet | APUi | APUi Installation Guide |
Backboxes
Cavity Wall
Providing mounting, enhanced performance and acoustic isolation in cavity wall and ceiling constructions.
Cavity wall backboxes are an easy to install mounting option in plasterboard cavity walls and ceilings (drywall) for Amina Invisible Loudspeakers . They create an acoustically tuned cavity behind the speaker, ensuring both consistent loudspeaker audio quality as well as minimising rearward airborne sound transmission.
| Specifications | BackboxCV345 | BackboxCV300 | BackboxCV200 |
| Dimensions | 500mm x 351mm x 71.5mm (1911/16” x1313/16” x 213/16”) | 450mm x 306mm x 71.5mm (173/4” x12” x 213/16”) | 500mm x 206mm x 71.5mm (1911/16” x82/16” x 213/16”) |
| Plasterboard cut-out required | 455mm x 350mm | 405mm x 305mm | 455mm x 205mm |
| Weight | 2.8Kg (6.2lbs) | 1.7Kg (3.75lbs) | 1.2Kg (2.64lbs) |
| Speaker cable entry | Rubber grommet (can be replaced by M20 gland) | Rubber grommet (can be replaced by M20 gland) | Rubber grommet (can be replaced by M20 gland) |
| Speaker fixing | 4x self tapping flange-head screws (supplied) | 4x self tapping flange-head screws (supplied) | 4x self tapping flange-head screws (supplied) |
| Wall fixing | 8x self tapping drywall screws (supplied) | 8x self tapping drywall screws (supplied) | 8x self tapping drywall screws (supplied) |
| Minimum cavity depth | 75mm | 75mm | 75mm |
| Sound pressure attenuation | -26dB on average over 150Hz - 5kHz range | -26dB on average over 150Hz - 5kHz range | -26dB on average over 150Hz - 5kHz range |
| BackboxCV345 | Edge7, Edge5, Mobius7, Mobiu5, MobiusDual |
| BackboxCV300 | iQ3, iQ1, iQ2 |
| BackboxCV200 | AIW350iN-S200 |
| Datasheets | Images | Installation Guides |
| Backbox CV200 Datasheet | BackboxCV200 | BackboxCV Install Guide |
| Backbox CV300 Datasheet | BackboxCV300 | |
| Backbox CV345 Datasheet | BackboxCV345 |
Solid Wall
Mounting option for solid block wall constructions.
The BackboxSW345 is an easy to install mounting option for solid or block walls and ceilings for Amina Invisible Loudspeakers with the dimensions 345mm x 450mm – Please note, not suitable for installation of Edge Series loudspeakers.
| Specifications | BackboxSW345 | Specifications | Specifications |
| Dimensions | 462mm x 358mm x 55mm (1812/64” x 146/64” x 211/64”) | 410mm x 313mm x 55mm (169/64” x 1221/64” x 211/64”) | 455mm x 209mm x 50mm (1729/32” x81/5” x 131/32”) |
| Weight | 2.8Kg | 2.15Kg | 1.6Kg |
| Required cavity cutout | 460mm x 355mm | 410mm x 310mm | 460mm x 210mm |
| Approximate cavity depth | 60mm | 60mm | 60mm |
| Speaker cable entry | Rubber grommets | Rubber grommets | Rubber grommets |
| Speaker fixing | 4 x self tapping flange-head screws (supplied) | 4 x self tapping flange-head screws (supplied) | 4 x self tapping flange-head screws (supplied) |
| Wall fixing | 4 x screws/anchors/wall plugs suitable for the wall/ceiling structure (not supplied) | 4 x screws/anchors/wall plugs suitable for the | 4 x screws/anchors/wall plugs suitable for the |
| BackboxSW345 | Mobius7, Mobius5, MobiusDual |
| BackboxSW300 | iQ1, iQ2, iQ3 |
| BackboxSW200 | AIW350iN-S200 |
| Datasheets | Images | Installation Guides |
| Backbox SW200 Datasheet | BackboxSW200 | BackboxSW Install Guide |
| Backbox SW300 Datasheet | BackboxSW300 | |
| Backbox SW345 Datasheet | BackboxSW345 |
Mounting Options
Mounting Blocks
For use when there is insufficient cavity space for an Amina cavity backbox (less than 75mm). Allows installation of Amina loudspeakers into plasterboard with a rear cavity depth of just 30mm – Please note, rear of loudspeaker should be covered using soft insulation material where mounting blocks are used to prevent ingress of debris over time.
Mounting block options for a range of plasterboard thickness are available, please state plasterboard thickness at time of order.
Shims
Shims available to allow alignment of speaker and backbox with any thickness plasterboard other than 12.5mm (1/2″) (or multi-layered build-up), ensuring that no more than 2mm plaster is applied to the front of a plaster-over loudspeaker.
May also be used for alignment in a retrofit installation or alignment of Edge Series speakers.
Loudspeaker Shims
These should be used where plasterboard thickness is greater than 12.5mm (1/2″), these will push the speaker forward.
To calculate correct loudspeaker shim requirement:
(Total plasterboard thickness) – 12.5mm = Shim thickness required
Example:
Double skin 12.5mm board: (2 x 12.5) – 12.5 = 12.5mm speaker shim
Backbox Shims
These should be used where plasterboard thickness is less than 12.5mm (1/2″), these will push the backbox and speaker assembly to the rear.
To calculate correct backbox shim requirement:
“12.5mm” – (total plasterboard thickness) = Shim thickness required
Example:
Single skin 10mm board: 12.5 – (10mm) = 2.5mm backbox shim
Please specify shim type, backbox size (CV345/300/200) and required shim thickness at time of order
Commercial Speakers
High Impedance 100V/70V Line Transformers
Providing a great solution for high end commercial installations, all Amina Invisible Loudspeakers can be supplied with high-quality toroidally wound transformers for both 100V and 70V line systems.
With a choice of either fixed-power or multi-tapped transformers available for all Amina Loudspeakers, the ability to specify a flexible and high performing invisible system has never been easier. Multi-tap transformer allows for adjustment to specification up to the moment of installation. Multi-tap transformer shown fitted to iQ3 (iQ3+MT).
Multi-tap Transformer (MT)
100V tappings – 5W, 10W, 15W, 20W
70V tappings – 2.5W, 5W, 7.5W, 10W
Fixed-value Transformer (100/70T)
Options for fixed-value 20W, 40W or 60W transformers available if required.
Note:
Transformer value must be equal to or lower than the power rating of the loudspeaker it is being used with. Custom rated transformers may be available. Please contact your distributor if you have any special requirements.
Ordering
Please state required amplifier voltage and power requirements at time of placing order. Please note that addition of transformers may increase lead time.
Example:
iQ3+MT, Mobius5+100/40, Edge5+MT.